High Bond Strength
Polymer-modified composition achieves tensile adhesion strength exceeding 1.50 MPa, ensuring permanent grip on ceramic, vitrified, marble, and granite.
Home > Why Tiloplast & Features
Why Use Tiloplast™ Tile Fixing Solutions?
Modern vitrified and porcelain tiles have low porosity (under 3%). Without polymer additives, traditional sand-cement fails to bond, leading to hollow sounds, debonding, and cracks.
The Technical Comparison
Understand why professional builders, architects, and applicators trust factory-premixed polymer adhesives over traditional on-site mixes.
✕ Traditional Sand-Cement Mix
- Dries too fast without curing: Without water-retention polymers, moisture escapes into the substrate quickly, causing early debonding.
- Leaves voids and air pockets: Laying tiles with thick sand-cement creates voids underneath, making tiles fragile and prone to cracking under point loads.
- Uneven bed & poor adhesion: Thick layers (15–20mm) shrink as they cure, pulling the tile away from the floor or wall.
- High vertical slip: Tiles slip and sag on vertical walls, making alignment difficult and time-consuming.
- Substantial material wastage: Significant on-site mixing wastage, inconsistency, and dust pollution.
✓ Tiloplast™ Polymer Adhesive
- Specially formulated polymer matrix: Graded quartz sand, high-strength Portland cement, and specialized polymers formulated for modern tiles and stones.
- Zero voids, 100% full coverage: Spreads smoothly with a notched trowel in a thin 3–6mm bed, providing complete support under every square inch.
- High sag & slip resistance: Advanced anti-slip additives keep heavy wall tiles and granite firmly in place without slippage.
- No shrinkage cracks: Water-retaining and self-curing properties eliminate shrinkage cracks completely.
- Extended open time: 15 to 25 minutes of open time gives applicators flexibility to align tiles accurately.
- Economical & time saving: Thin-layer application saves raw materials, saves transport weight, and cuts installation time in half.
Features and Benefits
Key performance advantages engineered into every bag of Tiloplast™ products.
High Sag Resistance
Non-slip thixotropic consistency prevents tiles from sliding down vertical walls, ensuring laser-straight grout lines.
Extended Open Time
Specially added polymers give extended open time (>20 mins) and adjustment time, so applicators have more flexibility during installation.
Zero Shrinkage Cracks
Self-curing and water-retention properties eliminate curing shrinkage, preventing hollow sounds and tile debonding later.
Zero Wastage
Premixed dry powder requires only water on site. Easy to apply with a notched trowel, minimizing mess and avoiding wasted material.
Economical & Fast
Applied in a thin 3–6 mm layer instead of 20 mm cement bed, delivering substantial cost savings in material, labor, and transport.
Self-Curing Technology
No separate water curing is required after tile fixing, saving water and labor on site while achieving maximum 28-day strength.
Water & Thermal Resistant
High-grade formulas (Type 3 & 4) withstand submerged conditions in swimming pools, water tanks, and thermal shocks on external facades.
IS 15477:2019 Certified
Fully compliant with Bureau of Indian Standards IS 15477:2019 (Types 1 to 4) and European standard EN 12004 benchmarks.
Quick Feature Comparison
| Factor | Traditional Sand-Cement | Tiloplast™ Tile Adhesive | Advantage |
|---|---|---|---|
| Application Thickness | 15 – 25 mm (Thick bed) | 3 – 6 mm (Thin bed) | 75% Less Material Used |
| Tensile Adhesion | < 0.25 MPa (Prone to debonding) | 0.50 – 1.50+ MPa (IS 15477) | 6x Stronger Bond |
| Curing Needed | Continuous 7–14 days water curing | Self-curing (No water curing needed) | Saves Water & Labor |
| Tile-on-Tile Fixing | Not possible (Fails completely) | Yes, Type 2, 3 and 4 | Renovate Without Breaking |
| Wall Tile Sagging | High slip, tiles slide down | Zero slip with thixotropic additives | Perfect Alignment |
| Void Formation | Common (Leads to hollow spots) | Virtually zero under notched trowel | Prevents Tile Cracking |
Ready to build stronger floors and walls?
Contact STAR QMS directly for factory rates, sample bags, dealership inquiries, or project technical consultation.